Rapid-air DUAL SWIVEL REEL WITH DISPLAY KEYPAD: 100 & 10 Bedienungsanleitung

1RAPID-AIR CORPORATION4601 KISHWAUKEE ST. • ROCKFORD, IL 61109-2925Phone: (815) 397-2578 • Fax: (815) 398-3887 • Web Site: www.rapidair.comdual swiv

10CAUTION: 1. The voltage feeding P2 and F– must be isolated from the AC line. Do not ground P2 or F– to set up a zero ground reference.

11WARNING: IF ADJUSTMENTS ARE MADE UNDER POWER, INSULATED ADJUSTMENT TOOLS MUST BE USED AND EYE PROTECTION MUST BE WORN. The RAMM has been factory

12For a period of one (1) year from date of original purchase Rapid-Air Corporation will repair or replace without charge devices which our examinati

13Pushbutton Control Reel 1000 Series Dual Swivel – 1/2-1 HP

14Pushbutton Control Reel 1000 Series Dual Swivel – 1-1/2 HP

15Pushbutton Control Reel 1000 Series Dual Swivel – 2 HP

16Pushbutton Control Reel 1000 Series Dual Swivel – 3 HP

2OPERATING INSTRUCTIONS ... pg. 3MEC

31. The machine that you have just received is fully assembled and ready to be put into position. Due to shipment vibration the machine

4A) If your reel has a fixed center shaft go to Step 1.B) If your reel has an adjustable center shaft go to Step 2.Step 1:Release and remove

5Eight different loop sensing arm operating positions can be selected during set-up. The material thickness determines the dancer arm rest position.

6The main pushbutton control box is mounted on the top of the reel frame. Located on the face of the console are eleven pushbuttons, one display, one

7MAIN SWITCH ON BUT NOT LIT1. CB tripped a. Reset CB2. Unit not plugged into main power. a. Plug into main power source.3. No power in incoming

8This product should be installed and serviced by a qualified technician, electrician or electrical maintenance personnel familiar with its operation

9The RAMM Full Wave Solid State DC Motor Speed Control represents the latest state-of-the-art design achiev-able through modern technology.FEATURES I